5 thoughts on “How to clean the gold ring by itself?”
Shannon
Materials required: baking soda, detergent, salt, toothbrush, hot water. 1, first pour a spoonful of salt in the pot. Salt can solve oil stain on the ring. 2, then pour a spoonful of baking soda. Calcium carbonate particles of soda can remove dirt. 3, add a few drops of detergent afterwards, and the detergent also has a good decontamination effect. 4, pouring in hot water, hot water can promote these substances faster dissolution. 5, then put the gold ring into the solution and soak for half an hour. 6, then take it out and use a toothbrush to brush the ring repeatedly. Remove the gap dirt. 7, so the ring is cleaned.
1. Put the gold jewelry into the cold water and neutral laundry powder and soak in the water for 15 minutes (avoid using tap water and acid -alkali laundry powder), and then use a soft brush to brush the surface. Surface stains.
(1) Mixed synthetic cleaning agent in salt and vinegar, and use it to wipe the pure gold jewelry, which can make it new for a long time.
(2), wipe or scrub with hot rice soup with hot rice, can also restore the gloss of gold jewelry.
2. Restore the luster of the silver jewelry, first wash the surface of the jewelry with the detergent, and then use the sodium sulfate solution (100 grams of water plus 20 grams of sodium sulfate sulfate). Essence
(1), wipe the silver jewelry: Take a little teeth powder, mix with hot water into a paste and apply it on the surface of the decoration, and then wipe the dry.
(2) Wash silver jewelry: Wash it with soapy water and polish. You can also wash it with hot soapy water, and then apply ammonia water and white mixture. After drying, wipe it with a small piece of velvet cloth until it is shiny.
3, the ring inlaid can roll a piece of cotton with a match stick, dip the frame in the mixture of flower dew and glycerin, and then scrub the frame, and then use a velvet cloth to brighten the ring.
The gold jewelry cleaning method has the following points:
1. Protecting the gloss of the gold jewelry, you can apply a layer of nail polish thinly.
. If there are black silver films on the surface, 2 grams of salt, 7 grams of soda, 8 grams of bleaching powder, 60 ml of water, and make it into a "golden device cleaning agent", put the gold jewelry on the gold jewelry on the golden jewelry on the jewelry In a bowl, pour the cleaning agent. After 2 hours, remove the golden jewelry, rinse with water (preferably not hard water), buried in the wood chips to dry, and then wipe it with a soft cloth.
3. The ring inlaid rolls a piece of cotton with a popsicle or match stick. After wetting in the mixed fluid of flower dew and glycerin, when scrubbing the gem, the frame is cleaned, and then the rings are brightened with a velvet cloth. Do not scrape it with a kind of sharp objects.
4. Salt and vinegar mixed with synthetic cleaner. Use it to wipe the pure gold jewelry, which can make it long for a long time.
5. Wipe the toothpaste or scrub it with a hot rice soup to restore the gloss.
Pay content for time limit to check for freenAnswer Hello, you can use the method. 1. Toothpaste can make our teeth white and make gold jewelry bright as new. Toothpaste can remove the dirt on the surface of the gold jewelry. But this method is not very good, because toothpaste contains wear particles. If it is often cleaned with toothpaste, the gold jewelry will reduce the weight of the gold jewelry and cause unnecessary losses. 2. Ammonia water has a very effective effect on the cleaning of the gold surface. The method of helping ammonia cleaning gold is also very simple. First take a bottle to add pure water, then drip a few drops of ammonia in it, and finally put the gold jewelry, force the force After shaking a few times, take out the gold jewelry and wipe dry with a soft cloth. Washing the gold jewelry with this method will make the gold brighter.nAsk the ring how to wash the small hole in the ringnAnswer Hello, you can gently brush the dust on the ring with a soft toothbrush. Be sure to use a soft brush brush instead of medium hardness or hard brush so that there will be no scratches on your ring. Gently brush, clean the dust in the gap with a brush. If necessary, you can use a toothpick to help clean up the dust in the gap. Or go to the store to wash it with professional instruments.n1 morenBleak
The gold jewelry cleaning method has the following points:
1. The gloss of the gold jewelry can be used to apply a layer of nail polish thinly.
2. If there are black silver film on the surface, 2 grams of salt, 7 grams of soda, 8 grams of bleaching powder, 60 ml of water, and make it into a "golden device cleaning agent", put the gold jewelry one by one In the bowl, pour the cleaning agent. After 2 hours, remove the golden jewelry, rinse with water (preferably not hard water), buried in the wood chips to dry, and then wipe it with a soft cloth.
3, the ring inlaid rolls a piece of cotton with a popsicle or match stick. After wetting in the mixed fluid of flower dew and glycerin, when scrubbing the gem, the frame is cleaned, and then the ring is brightened with a velvet cloth. Do not scrape it with a kind of sharp objects.
4, salt and vinegar mixed synthetic cleaning agent, and use it to wipe pure gold jewelry, which can make a long time.
5, wipe or scrub with hot rice soup with hot rice, can also restore gloss.
Materials required: baking soda, detergent, salt, toothbrush, hot water.
1, first pour a spoonful of salt in the pot. Salt can solve oil stain on the ring.
2, then pour a spoonful of baking soda. Calcium carbonate particles of soda can remove dirt.
3, add a few drops of detergent afterwards, and the detergent also has a good decontamination effect.
4, pouring in hot water, hot water can promote these substances faster dissolution.
5, then put the gold ring into the solution and soak for half an hour.
6, then take it out and use a toothbrush to brush the ring repeatedly. Remove the gap dirt.
7, so the ring is cleaned.
1. Put the gold jewelry into the cold water and neutral laundry powder and soak in the water for 15 minutes (avoid using tap water and acid -alkali laundry powder), and then use a soft brush to brush the surface. Surface stains.
(1) Mixed synthetic cleaning agent in salt and vinegar, and use it to wipe the pure gold jewelry, which can make it new for a long time.
(2), wipe or scrub with hot rice soup with hot rice, can also restore the gloss of gold jewelry.
2. Restore the luster of the silver jewelry, first wash the surface of the jewelry with the detergent, and then use the sodium sulfate solution (100 grams of water plus 20 grams of sodium sulfate sulfate). Essence
(1), wipe the silver jewelry: Take a little teeth powder, mix with hot water into a paste and apply it on the surface of the decoration, and then wipe the dry.
(2) Wash silver jewelry: Wash it with soapy water and polish. You can also wash it with hot soapy water, and then apply ammonia water and white mixture. After drying, wipe it with a small piece of velvet cloth until it is shiny.
3, the ring inlaid can roll a piece of cotton with a match stick, dip the frame in the mixture of flower dew and glycerin, and then scrub the frame, and then use a velvet cloth to brighten the ring.
The gold jewelry cleaning method has the following points:
1. Protecting the gloss of the gold jewelry, you can apply a layer of nail polish thinly.
. If there are black silver films on the surface, 2 grams of salt, 7 grams of soda, 8 grams of bleaching powder, 60 ml of water, and make it into a "golden device cleaning agent", put the gold jewelry on the gold jewelry on the golden jewelry on the jewelry In a bowl, pour the cleaning agent. After 2 hours, remove the golden jewelry, rinse with water (preferably not hard water), buried in the wood chips to dry, and then wipe it with a soft cloth.
3. The ring inlaid rolls a piece of cotton with a popsicle or match stick. After wetting in the mixed fluid of flower dew and glycerin, when scrubbing the gem, the frame is cleaned, and then the rings are brightened with a velvet cloth. Do not scrape it with a kind of sharp objects.
4. Salt and vinegar mixed with synthetic cleaner. Use it to wipe the pure gold jewelry, which can make it long for a long time.
5. Wipe the toothpaste or scrub it with a hot rice soup to restore the gloss.
Pay content for time limit to check for freenAnswer Hello, you can use the method. 1. Toothpaste can make our teeth white and make gold jewelry bright as new. Toothpaste can remove the dirt on the surface of the gold jewelry. But this method is not very good, because toothpaste contains wear particles. If it is often cleaned with toothpaste, the gold jewelry will reduce the weight of the gold jewelry and cause unnecessary losses. 2. Ammonia water has a very effective effect on the cleaning of the gold surface. The method of helping ammonia cleaning gold is also very simple. First take a bottle to add pure water, then drip a few drops of ammonia in it, and finally put the gold jewelry, force the force After shaking a few times, take out the gold jewelry and wipe dry with a soft cloth. Washing the gold jewelry with this method will make the gold brighter.nAsk the ring how to wash the small hole in the ringnAnswer Hello, you can gently brush the dust on the ring with a soft toothbrush. Be sure to use a soft brush brush instead of medium hardness or hard brush so that there will be no scratches on your ring. Gently brush, clean the dust in the gap with a brush. If necessary, you can use a toothpick to help clean up the dust in the gap. Or go to the store to wash it with professional instruments.n1 morenBleak
The gold jewelry cleaning method has the following points:
1. The gloss of the gold jewelry can be used to apply a layer of nail polish thinly.
2. If there are black silver film on the surface, 2 grams of salt, 7 grams of soda, 8 grams of bleaching powder, 60 ml of water, and make it into a "golden device cleaning agent", put the gold jewelry one by one In the bowl, pour the cleaning agent. After 2 hours, remove the golden jewelry, rinse with water (preferably not hard water), buried in the wood chips to dry, and then wipe it with a soft cloth.
3, the ring inlaid rolls a piece of cotton with a popsicle or match stick. After wetting in the mixed fluid of flower dew and glycerin, when scrubbing the gem, the frame is cleaned, and then the ring is brightened with a velvet cloth. Do not scrape it with a kind of sharp objects.
4, salt and vinegar mixed synthetic cleaning agent, and use it to wipe pure gold jewelry, which can make a long time.
5, wipe or scrub with hot rice soup with hot rice, can also restore gloss.